Anyone that’s setup software raid on a system with multiple storage adapters has probably run into this kind of issue, but I thought I’d mention it. Last weekend I built a machine to replace my server (the server was to be captured into a VM). The main system was going to be installed onto dual IDE drives, the VM partition and other data on dual 400GB SATA drives. Well, install went well after getting past some of the irq issues I mentioned in a previous writeup. md0 was /boot and so on…. (md0 residing on the dual ide drives.) When the system went to reboot though it didn’t get very far. It complained of not finding a boot image (I think that was the message – didn’t make a note.)